Specifications

• Platform Dimensions -
  Model 24 – 36.25" x 45"
  Model 42 - 36.25" x 63"
  Model 60 - 36.25" x 81"
  Model 72 - 36.25" x 93"
  Model 96 - 36.25" x 118"
• Platform - 12 gauge non-skid zinc clad steel
• Non-Skid Access Ramps
• Type of Drive -
  Acme Screw: minimum 3/4 HP
  Hydraulic: 24 VDC 1 1/2 HP
• Controller - Constant pressure switch and an emergency alarm/stop button
• Power Supply - 115 VAC, single phase
  (220 volt optional)
• Rated Speed - Hydraulic: 20 ft/min
  Acme Screw: 9 ft/min. (0.081 m/s)
• Capacity - One person in a wheelchair
• Rated Load - 750 lbs capacity

Commercial Platform Lift for Wheelchair Access
Wheelchair Lifts, Elevators with Residential Applications
Models BC & HBC: Acme Screw Drive or Hydraulic Drive

The BC and HBC models are manufactured as an unenclosed lift. This unit is often installed within a vertical runway built by others.

Because of its versatility, this model can overcome accessibility barriers in a variety of different settings. Common applications include: churches, libraries, restaurants, and schools.

Hudson Accessibility can supply a wide variety of flush mounted (fire rated or non-fire rated) doors. Local codes and regulations will specify the type of door permitted in your area. Each vertical lift is equipped with a constant pressure paddle switch and an emergency alarm/stop button.

Features and Options

This Platform lift makes wheelchair accessibility safe and easy and is equipped with many standard features and options.

• A main control panel is found on the side guard of each vertical lift
• Equipped with constant pressure switch and an emergency stop button
• 6 textured Color options to match any decor
• Top and bottom landing gates/doors
• Back-up safety nut and auto-lubrication system
• Non-skid platform & access ramp make it safe and easy to enter/exit the lift
• Aluminum grab rail comes standard commercial grade lifts
• Optional Flush mounted steel door
• Four (4) year limited parts warranty on the basic unit, including all electrical and drive system components
• On/off keyed switch can be added on all operating panels for extra security
• FSV option allows for travel speeds up to 30 feet per minute
• Standby power option allows the unit to be raised or lowered under emergency battery power
• Low profile carriage available
• Runway and roof extensions available
• Stainless steel face plate control panel with emergency lighting
• Fire rated steel doors can be supplied
• Model BC features Acme Screw Drive
• Model HBC features Hydraulic Drive